Electric · Offroad · Trail & enduro

KTM
Freeride E

2027 · Pure electric freedom.

19.2 kW peak and 37.6 Nm from a 50.4 V motor, a removable 110 Ah MX50 pack for two to three hours of trail, 43 mm WP XACT split forks, a WP XPLOR PDS shock, Braktec brakes and 112 kg — near-silent enduro. Available through NTG for teams, schools and resellers, EU-wide.

On requestprice on enquiry · net · excl. VAT

See how to order Technical details

01.The drive

19.2 kW peak from a 50.4 V permanent-magnet motor, a 110 Ah MX50 pack that comes out in minutes, a 660 W charger and three ride modes.

4 features

19.2 kW, 37.6 Nm

Electric motor

A 50.4 V permanent-magnet synchronous motor with 8.3 kW nominal and 19.2 kW peak, 37.6 Nm from the first degree of throttle and 95 km/h at the top — enduro pace, delivered in near silence.

19.2 kWpeak
95 km/htop

MX50, 110 Ah

Battery

The MX50 lithium-ion pack — 110 Ah, tested in the worst conditions the enduro range sees — gives two to three hours of typical trail riding. It lifts out in under ten minutes, so a second pack is a second ride.

110 Ah
2–3 htrail

660 W

Charger

A 660 W charger on any household socket (90–265 V): 80 % in six hours, full in eight — plugged in overnight, ready at breakfast.

6 / 8 h80 / 100 %

Three modes

Ride modes

Three ride modes that change torque and power delivery to the scenario — a gentle map for technical single-track, a full map for open trail — selected from the bar.

02.The chassis

A chromoly frame built for a light feel, 43 mm WP XACT split forks with 250 mm, a WP XPLOR PDS shock with 240 mm, Braktec brakes and 21 / 18-inch wheels.

4 features

Chromoly, light feel

Frame

A chromium-molybdenum steel frame developed for a light, agile feel first — the battery and motor carried low and central — with an aluminium and polyamide subframe.

WP XACT 43 / XPLOR PDS

Suspension

43 mm WP XACT split-design forks with 250 mm of travel keep the front reactive yet planted; a WP XPLOR PDS shock with 240 mm works without a linkage, for ground clearance over rocks and logs.

250 / 240 mmtravel

Braktec, 260 / 220 mm

Brakes

Braktec hydraulic brakes with a 260 mm front and 220 mm rear disc, mounted on the NEKEN bar and a forged pedal — enduro-grade stopping for a 112 kg bike.

260 / 220 mmdiscs

21" / 18"

Wheels & tyres

Full-size enduro wheels — a 21-inch front and 18-inch rear on aluminium rims — in 90/90 and 120/90 knobblies, so the bike rolls over what a trail puts in front of it.

03.Electronics & safety

The LCD dashboard from the EXC enduro range, a rollover sensor, and a motor that makes no noise where noise is the problem.

3 features

From the EXC

LCD dashboard

The same resistant LCD dashboard as the EXC enduro range: ride mode, battery state, speed and trip on one screen, readable through mud and glare.

Rollover sensor

Safety

A rollover sensor cuts the power the moment the bike tips over, so a dropped Freeride E on a hillside is simply a bike to pick up, not a bike that keeps pulling.

Near silent

Access

No exhaust note and no emissions: forest trails with noise restrictions, practice loops near houses, early starts — the places and hours a combustion enduro can't go.

04.Trail-ready

A 910 mm seat, 112 kg homologated, 360 mm of ground clearance and a Pro Taper bar — a proper enduro stance on an electric drivetrain.

3 features

910 mm, 360 mm

Ergonomics

A 910 mm seat and 360 mm of ground clearance put the rider in a proper enduro stance over a slim centre section; a Pro Taper aluminium bar in Ø 28/22 mm.

910 mmseat
360 mmclearance

112 kg

Weight

Homologated at 112 kg with the 29 kg pack fitted — light enough to muscle through a rut, lift over a log, or load alone.

112 kghomologated

Up to 2 years

PowerParts & support

Handguards, a skid plate, a second MX50 pack and the enduro PowerParts catalogue — and the Freeride E carries up to two years of manufacturer coverage, double the offroad standard.

05.Warranty & support

New bikes, delivered through authorised channels, with the paperwork the warranty is tied to.

Model year 2027 · up to 2 years

Premium manufacturer's warranty

The Freeride E carries up to 2 years of manufacturer coverage. It stays valid with intended use and scheduled services at an authorised KTM dealer, under the standard conditions on the delivery certificate. Every bike NTG supplies is new and comes with that certificate.

Technical details

Specifications

Manufacturer data, model year 2027. Delivered spec can vary by market — we confirm on the order confirmation.

Electric motor50.4 V PMSM, permanent magnet

Max. power19.2 kW

Rated output8.3 kW

Torque37.6 Nm

Max. motor speed12 000 rpm

BatteryMX50 lithium-ion, 110 Ah, removable

Charger660 W, 90–265 V

Charging time, 80 / 100 %360 / 480 min

Ride modes3

Secondary ratio13:50

Top speed95 km/h

FrameChromium-molybdenum steel

SubframeAluminium / polyamide glass fibre

HandlebarPro Taper aluminium Ø 28/22 mm

Front brake260 mm disc, Braktec

Rear brake220 mm disc, Braktec

Wheels1.60 × 21" / 2.15 × 18"

Tyres90/90-21 · 120/90-18

Chain520, non-sealed

Steering head angle65.6°

FrontWP XACT USD split fork, Ø 43 mm

RearWP XPLOR shock, PDS

Travel front250 mm

Travel rear240 mm

Fork offset20 mm

Seat height910 mm

Wheelbase1 455 ± 15 mm

Ground clearance360 mm

Weight, homologated112 kg

Order

2027 KTM Freeride E

New, uncrated, delivered through authorised channels. Priced net, excl. VAT, for teams and resellers. Tell us the quantity and destination and we quote within one working day.

AvailabilityOn request
PriceOn request · price on enquiry
DeliveryEU-wide

In list

Review & send

Ordering several models? Add each to the list and send everything at once from the order bar.

Product images and technical data © KTM AG, used for product identification. North Trade Group is an independent trader and not an authorised KTM dealer or distributor. Specifications subject to change by the manufacturer.

KTMFreeride E