Enduro · 4-stroke

Husqvarna
FE 501

2027 · 64 hp of big-bore enduro.

The most powerful FE there is: 510.9 cc of SOHC four-stroke, 64 hp at 29.5 kg, placed for anti-squat, with traction control and quickshifter on the switch. Available through NTG for teams and resellers, EU-wide.

€ 10 590net · excl. VAT · per unit

See how to order Technical details

01.Before the trail

Map switch with traction control and quickshifter on it, a filter you reach without tools, and footrests that shed mud.

5 features

Three functions, one thumb

Map Select Switch

Two EFI maps, traction control and the quickshifter, all from the switch on the bar. Traction control reads throttle against how fast the revs climb and trims the power when the rear spins up; switch it off for full control. Map 1 linear, Map 2 sharper.

Set it on the stand

Tool-free adjustability

Compression and rebound clickers on the top and bottom of each fork leg, rebound and high/low-speed compression on the shock — all by hand. A change takes the time it takes to twist them.

Breathe, don't drink

Airbox

Inlet ducts placed to keep the airflow clean and the filter protected. The Twin Air filter sits on a cage that only fits one way, and comes out without tools behind the left side panel.

Held, not hung

Fuel tank

Eight litres inside the bodywork on a rubber cushion, so the tank stays put and the frame does not wear. The external fuel line is routed where sticks and rocks do not reach it.

8 lcapacity

Nothing to catch

Footrests

Large footrests shaped with CFD so mud does not build up, mounted inboard so they are less likely to hook the ground through deep ruts.

02.Big bore, 64 hp

510.9 cc, 29.5 kg, 64 hp — the most powerful FE in the line-up, built low so the chassis can use it.

8 features

The big one

501 cc four-stroke

The most powerful engine in the FE range, built with advanced engineering and placed in the frame to help the anti-squat behaviour of the chassis while centralising mass. 29.5 kg and a peak of 64 hp. Six speeds, DDS clutch on Brembo hydraulics.

510.9cm³
64 hp
29.5 kgengine

Compact SOHC

SOHC cylinder head

A compact, light SOHC head with the camshaft as close to the centre of gravity as it will go. A fine-punched cam chain and a DLC-coated rocker arm for efficiency and reliability, a single oil jet for cooling, and valve timing set for torque and a smooth delivery.

Forged, bridged, light

Cylinder & piston

A 95 mm bore and 72 mm stroke in a light aluminium cylinder, with a forged CP bridged-box piston whose anodised ring grooves extend the service intervals. Compression 12.75:1.

No linkage on the cable

Throttle body

A 42 mm Keihin throttle body tuned for response: the injector placed for the most efficient flow into the chamber, and the throttle cable on the body directly, with no linkage in between.

Two-piece header

Exhaust

A two-piece header that comes off without removing the shock, and a short compact silencer that keeps the noise down — aluminium, black-coated, at the lowest weight the performance allows.

Fan fitted

Cooling

CFD-designed aluminium radiators with a fan as standard, a large centre tube through the frame to keep the coolant flowing, an internal thermostat, and a threaded cap for the pre-ride check.

Clutch stays untouched

Quickshifter

Switched from the map switch: the ignition is cut for a fraction of a second and the next gear goes in at full throttle without the clutch, from second up.

Press, go

Electric start

A 2 Ah lithium-ion battery and a proven starter, with the combined start/stop switch on the right of the bar. Stall in a rut, press, go.

2 AhLi-ion

03.The chassis

A white chromoly frame, a 1.8 kg hybrid subframe and WP XACT at both ends — the enduro chassis built for feedback.

7 features

Where the material goes

Frame

Chromium-molybdenum steel with the material placed around the steering head and upper shock mount for confident turn-in and stability — in a metallic white powder coat, with frame protectors that guard the paint and give the knees something to grip.

1.8 kg at the back

Hybrid subframe

60 % polyamide, 40 % aluminium: cast aluminium lower spars and mounts for reliability, injection-moulded polyamide up top for a flex you can feel. Strength and durability at 1.8 kg.

Flex by calculation

Swingarm

Die-cast with a calculated rigidity, a 22 mm rear axle to complement the chassis flex, and a durable chain slider built in — momentum kept through the rutted corners.

Closed cartridge, open hands

WP XACT closed-cartridge fork

Polished lightweight springs, mid-valve pistons that stop the oil foaming, and a one-piece hydrostop in the last 68 mm that keeps the front end driving when you land hard. Compression and rebound by hand, top and bottom of each leg.

Ø 48 mm
300 mmtravel

Linkage, CFD piston

WP XACT shock

A CFD-optimised main piston for comfort off the top and predictability everywhere else, working through a linkage. Rebound and high/low-speed compression adjusted by hand.

300 mmtravel

Brembo, front to lever

Brakes & clutch

Single-piece aluminium Brembo calipers front and rear on 260 / 220 mm discs that shed mud; a strong rear pedal that survives the ruts. The Brembo hydraulic clutch compensates free play on its own, so the bite point is the same cold, hot and a season later.

260 / 220 mmdiscs

22 mm offset

Triple clamps & wheels

Black-anodised CNC triple clamps with a 22 mm offset and a wide bar clamp that resists twisting in a crash, two mounting positions for the ProTaper bar. Black-anodised alloy rims on CNC hubs, wrapped in Michelin enduro rubber.

04.Into the night

An LED you can swap in minutes, bodywork built for standing up, and electronics that read the terrain with you.

3 features

Quick-release light

LED headlight

A bright LED unit that makes dense woodland at night readable — mounted in the mask on a quick-release, so a broken one is swapped in minutes, not an afternoon.

Stand up, lock in

Bodywork

Smooth contact points in the rider triangle so you can grip the bike with your legs and not your arms; in-mould graphics on the shrouds that do not peel; a tall, wide seat with a high-grip cover for the hard acceleration.

Grip, managed

Traction control

The EMS watches throttle position against how fast the revs climb; when the rear spins up faster than the ground allows it trims the power until the tyre bites. On or off from the map switch — your call per test.

05.Warranty & support

New bikes, delivered through authorised channels, with the paperwork the warranty is tied to.

Model year 2027 onwards

Premium manufacturer's warranty

Offroad bikes from model year 2027 carry up to 1 year of manufacturer coverage. It stays valid with intended use and scheduled services at an authorised Husqvarna Motorcycles dealer, under the standard conditions on the delivery certificate. Every bike NTG supplies is new and comes with that certificate.

Technical details

Specifications

Manufacturer data, model year 2027. Delivered spec can vary by market — we confirm on the order confirmation.

Design1-cylinder, 4-stroke, SOHC

Displacement510.9 cm³

Transmission6-speed

Fuel systemKeihin EFI, 42 mm throttle body

Engine managementKeihin EMS

ClutchWet DDS multi-disc, Brembo hydraulics

Primary drive29:72

StarterElectric, 2 Ah Li-ion

FrameCentral double-cradle, 25CrMo4 steel, white

SubframeHybrid polyamide / aluminium, 1.8 kg

Triple clampsCNC-machined, black anodised, 22 mm offset

Front brake260 mm disc, Brembo

Rear brake220 mm disc, Brembo

Clutch actuationBrembo hydraulic

Chain520 X-ring

Rear sprocketSteel

WheelsBlack-anodised alloy rims, CNC hubs

TyresMichelin

HandlebarProTaper, aluminium Ø 28/22 mm

FrontWP XACT-USD closed cartridge, Ø 48 mm

RearWP XACT monoshock with linkage

Travel front300 mm

Travel rear300 mm

Front adjustmentCompression, rebound

Rear adjustmentHigh/low-speed compression, rebound, preload

Seat height952 mm

Ground clearance343 mm

Tank capacity8 l

Weight, without fuel110.6 kg

Order

2027 Husqvarna FE 501

New, uncrated, delivered through authorised channels. Priced net, excl. VAT, for teams and resellers. Tell us the quantity and destination and we quote within one working day.

AvailabilityOn request
Price€ 10 590 net · excl. VAT
DeliveryEU-wide

In list

Review & send

Ordering several models? Add each to the list and send everything at once from the order bar.

Product images and technical data © Husqvarna Motorcycles GmbH, used for product identification. North Trade Group is an independent trader and not an authorised Husqvarna Motorcycles dealer or distributor. Specifications subject to change by the manufacturer.

HusqvarnaFE 501