Motocross · 2-stroke · Youth 50

Husqvarna
TC 50

2027 · The first real one.

For most young riders this is the first proper motocross bike: an automatic clutch, WP suspension with adjustable ergonomics, and Swedish-inspired graphics moulded into the plastic. Built to be grown into. Available through NTG for teams and resellers, EU-wide.

€ 3 995net · excl. VAT · per unit

See how to order Technical details
2027 Husqvarna TC 50 Right view 2027 Husqvarna TC 50 Front ¾ view 2027 Husqvarna TC 50 Left view 2027 Husqvarna TC 50 Rear ¾ view

01.Style

Full-size bodywork logic, a filter you change by hand, ODI grips for small hands.

4 features
2027 Husqvarna TC 50 — Bodywork

Scaled, not shrunk

Bodywork

Bodywork scaled down from the full-size bikes, with the same proven ergonomics. Larger contact points let a small rider grip the bike with the legs for control, and a flat seat profile lets them move fore and aft without a step in the way.

2027 Husqvarna TC 50 — Airbox

Seat off, filter out

Airbox

A simple installation makes filter changes fast, clean and easy: pull the quick-release seat by hand and the Twin Air filter is right there. It has a large surface area for airflow, and it is fitted as standard — nothing to upgrade before the first ride.

2027 Husqvarna TC 50 — Handlebars & grips

Get a grip

Handlebars & grips

High-quality black-anodised aluminium bars that damp vibration and add stability, in a wide bend that gives comfort and puts the rider in the right position on the bike. Thin-diameter ODI grips for small hands — a proper hold on the bars is where control starts.

2027 Husqvarna TC 50 — Fuel tank

Slim and full

Fuel tank

A slim 2.35-litre tank fitted to the frame inside the ergonomic bodywork, so the bike stays narrow between small knees and there is nothing to snag a boot on. Ample capacity for a moto at this engine size, and quick to top up between them.

02.Fit and frame

Four bar positions, two bodywork heights, a chromoly frame and forged clamps.

4 features
2027 Husqvarna TC 50 — Adjustable ergonomics

Find the right fit

Adjustable ergonomics

Built to fit more than one size of rider. Four handlebar positions, a rear shock that moves from its standard high position to a lower setting, and a subframe and bodywork that mount in two places. Set it up for the rider at the start of the season and again halfway through.

2027 Husqvarna TC 50 — Frame

Built tough

Frame

Chromium-molybdenum steel with precise geometry and calculated flex. The shock is not tied to the upper frame tube, so less energy goes through the chassis and the bike is more stable. Textured frame protectors give grip and keep the dark-blue metallic powder coat looking new.

2027 Husqvarna TC 50 — Subframe

Hybrid, adjustable

Subframe

Polyamide reinforced with glass fibre plus steel bars: a hybrid subframe that is light, robust and reliable. It plays a real part in how the bike handles, and it adjusts in height to match the rider — so the seat height moves with the kid, and the bike lasts more than one season.

2027 Husqvarna TC 50 — Forged triple clamps

In line

Forged triple clamps

Forged triple clamps that keep the fork legs aligned so the WP suspension works as intended. The upper clamp seals dirt and water away from the steering bearings — longer between services — and the flex is calculated without losing stability.

03.Suspension

35 mm WP XACT with an air spring, a fully adjustable shock and a cast swingarm.

3 features
2027 Husqvarna TC 50 — WP XACT fork

Pumped up

WP XACT fork

35 mm WP XACT USD fork — very light, with the damping and comfort that let a young rider commit to the rough stuff. The air spring in the left leg is set with the supplied pump for rider weight and track, and the fork gives 165 mm of travel.

  • Ø 35 mm
  • 165 mmtravel
2027 Husqvarna TC 50 — WP XACT shock

Fully adjustable

WP XACT shock

WP XACT shock mounted directly to the swingarm, with race-tested settings for exceptional damping. Preload, high- and low-speed compression and rebound are all adjustable, so the shock can be tailored to any rider — and re-tailored as they get heavier and faster — rather than the other way round.

  • 190.5 mmtravel
2027 Husqvarna TC 50 — Swingarm

12 mm axle

Swingarm

Hollow die-cast aluminium swingarm made from a single piece for optimal stiffness, with a 12 mm rear axle chosen to match the flex characteristics of the frame. The chain guard and chain slider are designed to stop mud building up around the arm — less weight to carry through a wet moto, less to wear.

04.Motor

A compact two-stroke with a broad spread of power, a Dell'Orto carb and an automatic clutch that lasts.

5 features
2027 Husqvarna TC 50 — Engine

Broad and usable

Engine

Compact and powerful, with a broad spread of usable power for the first-timer and the fast kid alike. The crankshaft sits close to the centre of gravity — better handling, and the perfect intake angle for the reed valve. 49.9 cm³ in a 43.5 kg bike.

  • 49.9cm³
  • 43.5 kgwithout fuel
  • Automaticclutch
2027 Husqvarna TC 50 — Cylinder head

Heat out

Cylinder head

Cylinder-head inserts made specifically for the TC 50 to conduct heat away faster, so the engine runs at the same temperature at the end of a moto as at the start. Unique to this engine — they do not fit any other TC.

2027 Husqvarna TC 50 — Carburettor

The heart

Carburettor

A proven Dell'Orto PHBG 19 BS carburettor with the settings matched to the engine, so the TC 50 runs cleanly through the rev range from the day it is unboxed. A simple, well-known part that any dealer can service and any parent can learn.

2027 Husqvarna TC 50 — Exhaust system

Seamless inside

Exhaust system

Welding seams removed from the inside so the exhaust gas has nothing to trip over, and a laser-cut flange gasket for a proper seal. The silencer end cap seals tighter than before, in a black-anodised finish. Maximum power from the same engine, and a pipe that stays sealed.

2027 Husqvarna TC 50 — Automatic clutch

Race-matic

Automatic clutch

An automatic centrifugal clutch with a reinforced basket and quality plates: durable and consistent, so the bike pulls away the same way every time. The pack is assembled with Torx bolts for quick inspection and replacement, and a gasket behind the cover keeps it sealed.

05.Parts

Hydraulic brakes on waved discs, one big radiator, Maxxis rubber.

3 features
2027 Husqvarna TC 50 — Brakes

Stopping power

Brakes

Hydraulically operated callipers on state-of-the-art waved discs front and rear, 160 mm each — consistent, reliable braking that a small hand can modulate. Durable callipers and discs stretch the maintenance schedule, and a forged rear brake pedal gives the rider real control under the boot.

2027 Husqvarna TC 50 — Radiator

Stay cool

Radiator

One large-capacity radiator with simple hose routing, positioned by the overall design where it is out of harm's way in a fall. Exceptional cooling for a 50, and a threaded cap that makes the coolant check before each ride a ten-second job.

2027 Husqvarna TC 50 — Wheels & tyres

Rip 'n go

Wheels & tyres

Lightweight aluminium hubs laced with strong spokes to black-anodised aluminium rims — a reliable set of wheels that stays true through a season of hard landings. Maxxis Maxxcross MX-ST tyres give excellent traction and predictability across a wide range of surfaces, which is what a young rider needs to trust the bike.

06.Warranty & support

New bikes, delivered through authorised channels, with the paperwork the warranty is tied to.

2027 Husqvarna TC 50 — Premium manufacturer's warranty

Model year 2027 onwards

Premium manufacturer's warranty

Offroad bikes from model year 2027 carry up to 1 year of manufacturer coverage. It stays valid with intended use and scheduled services at an authorised Husqvarna Motorcycles dealer, under the standard conditions on the delivery certificate. Every bike NTG supplies is new and comes with that certificate.

Technical details

Specifications

Manufacturer data, model year 2027. Delivered spec can vary by market — we confirm on the order confirmation.

Design1-cylinder, 2-stroke
Displacement49.9 cm³
Bore / stroke39.5 / 40.7 mm
TransmissionSingle speed
CarburettorDell'Orto PHBG 19 BS
ClutchCentrifugal, adjustable
Primary drive33:61
StarterKickstarter
FrameCentral-tube frame with double cradle, chromoly steel
SubframeSteel / polyamide glass fibre
Front brakeHydraulic, 160 mm wave disc
Rear brakeHydraulic, 160 mm wave disc
Chain415, non-sealed
HandlebarTapered aluminium, Ø 28/22/18 mm
Wheels1.50 x 12" / 1.60 x 10"
TyresMaxxis Maxxcross MX-ST, 60/100-12 / 2.75-10
FrontWP XACT 35 USD, air spring, Ø 35 mm
RearWP XACT monoshock, direct mount
Travel front165 mm
Travel rear190.5 mm
Front adjustmentAir preload
Rear adjustmentPreload, high/low-speed compression, rebound
Steering head angle66°
Seat height645 mm
Ground clearance233 mm
Wheelbase1026 ± 10 mm
Tank capacity2.35 l
Weight, without fuel43.5 kg

Order

2027 Husqvarna TC 50

New, uncrated, delivered through authorised channels. Priced net, excl. VAT, for teams and resellers. Tell us the quantity and destination and we quote within one working day.

  • AvailabilityOn request
  • Price€ 3 995 net · excl. VAT
  • DeliveryEU-wide
In list
1
Review & send

Request a quote opens your request for this model — set the quantity and send. Ordering several models? Add each to the list and send everything at once from the order bar.

Product images and technical data © Husqvarna Motorcycles GmbH, used for product identification. North Trade Group is an independent trader and not an authorised Husqvarna Motorcycles dealer or distributor. Specifications subject to change by the manufacturer.